First browse to the ip address of your tenvis ip camera in your browser,
In Device management., tick on "Enable preset positions"
Next, inn Live View , in Preset, Select number 1 from drop down box and position your camera using the controls left right etc. once in right required position, click on SET to set Preset 1. Similarly you can set upto 8 presets. Keep Preset
1 as your reboot preset location
Select the Preset Location (in our case no 1) to the location we want the camera to go to on rebooting. Click on Submit. Reboot using the menu on left hand side and check. Also check by powering off and on.
In Device management., tick on "Enable preset positions"
Next, inn Live View , in Preset, Select number 1 from drop down box and position your camera using the controls left right etc. once in right required position, click on SET to set Preset 1. Similarly you can set upto 8 presets. Keep Preset
Next, in Device management In PTZ Settings. Remove Tick on "Go Center
on Boot", on doing that. "Go preset position on booting" option will be
visible on the next line.
Select the Preset Location (in our case no 1) to the location we want the camera to go to on rebooting. Click on Submit. Reboot using the menu on left hand side and check. Also check by powering off and on.
